Fibre-Lyte carbon chainrings, 1st test

Publié le par Adrien

Today was the first ride with the Fibre-Lyte carbon chainrings Roues Artisanales could get thanks to Fairwheelbikes. A short and slow 2 hours recovery ride with a brand new Campagnolo Record CR 5.9mm wide chain and a cheap new Miche 10s cassette used on training wheels.

Here is the bike they're tested out on, the only difference with today ride is the wheels; they are classic training wheels with 32/36 3 times crossed 2mm spokes with Open Pro rims and Centaur hubs. This is my service course bike (except wheels and chainrings)



Click on the picture for larger view


So my first feeling riding these chainrings is that I simply couldn't notice any difference with the traditionnal alloy ones while riding normally.
Gear changes are pretty quick, quicker than with the FSA Pro Road chainrings I used before. I've been well surprised by the quality of the shift though. I didn't expect them to be that good to shift.

After a few kilometers, my legs got better and better and finally I decided to do some accelerations even it was a recovery ride.
The big chainring went easily out of shape each time I pushed the pedals, I definitely didn't find them stiff although I could read they were stiffer than alloy rings. It was no problem of course but I'd like to mention they're flexier than the previous rings I used.

I didn't try to shift to the 53 teeth chainring under load yet but I'll try it tomorrow.



Click on the picture for larger view


Previous Roues Artisanales articles: 1, 2

Publié dans Matériel || Stuff

Commenter cet article